rokko74 έγραψε:kire612002 έγραψε:ξερεις τι κωδικο σου βγαζει?
Τι κωδικό? Που τον βγάζει? Τι είναι τούτο?
ο κωδικος που αναφερει την αιτια του προβληματος(OBD-On board diagnostic).Συνηθως βαζει το συνεργειο το διαγνωστικο του αλλα καπου διαβασα οτι σε μας μπορει να βγει με κολπο.Σου παραθετω το πως αν θελεις να δοκιμασεις.Αν πετυχει βλεπεις τι σημαινει ο κωδικος και πρατεις τα αναλογα.Νομιζω οτι τα kj εμπιπτουν στην τελευταια παραγραφο.
[i]1.
OFF - Key Removal Position (where you begin from when you insert the key)
To get the codes, you must insert the key (OFF) and follow this sequence
Turn the key from "OFF" to "ON" 3 times ending in the "ON" position. (might be 4 times.. conflicting reports)
The codes will then flash where the digital odometer readout is.
Copy down the codes and go to Diagnostic Trouble Codes (http://www.wjjeeps.com/faultcodes.htm) and find out what the code means.
________________________________________
2.
The "Key Tricks"
Older (OBDI) models - Start with the ignition off. Within five seconds, switch the key on, off, on, off, on. ("On" is NOT "Start" and "Off" is NOT "Lock"). The "check engine" light will flash. Count the flashes. Each code is a two digit code, so a (for example) 23 would be FLASH FLASH (pause) FLASH FLASH FLASH (long pause). It will never flash more than 9 times, so watch for those pauses!
Newer (OBDII) models - Put the key into the ignition, push down the odometer reset button, then turn the key to RUN with your finger on the button - and then release the button. The odometer will go through 1111111 through 999999, then display the car's serial number. It will then show the error codes (it might show them starting with P). If this method does not work, try the OBDI method.[/i]